Poison Spyder Customs
Showing 1–48 of 114 results
-
Rock Sliders and Guards
Poison Spyder Ricochet Rockers (Bare Steel) – 17-08-040
- 2-door models
- Dimpled step plate for easy entry
- Frame-mounted for ultimate strength
- Protects the Jeep’s rocker panels from damage on the trail
- 1.75” OD x .120” wall DOM main tube with 1.5” x .120” wall DOM slider tube
SKU: PSC17-08-040 -
Bumpers, Tire Carriers & Winch Mounts, Spare Tire Carrier Delete Plates, Spare Tire Carriers & Accessories
Poison Spyder Tire Carrier Delete Plate with Camera Mount (Black) – 19-04-013P1
Bumpers, Tire Carriers & Winch Mounts, Spare Tire Carrier Delete Plates, Spare Tire Carriers & AccessoriesPoison Spyder Tire Carrier Delete Plate with Camera Mount (Black) – 19-04-013P1
- Wrangler JL, 2 and 4 Door
- SpyderShell Armor Coat finish in semi-gloss black
- CNC laser cut from 1/8 inch aluminum plate
- Camera relocating bracket included
- Cleans up the appearance of the rear of the Wrangler JL
- Conceals the cabin air vents and spare tire mount bolt holes
- Provides a convenient place to re-mount the license plate
- Brake-formed offset to allow clearance for the tailgate vents to function properly
- Easy Installation using the OE spare tire mount bolts
SKU: PSC19-04-013P1 -
-
Body Kits & Accessories, Exterior Parts, Hood Vent
Poison Spyder Hood Louver (Black) – 19-53-012P1
- For Rubicon models only
- Black powder coat finish
- Crafted from quality, thick gauge aluminum sheet
- Aluminum makes the hood louver light weight and corrosion resistant
- CNC laser-cut and die-stamped
- Helps reduce “hood wobble” at speeds
- Keeps engine cool
- Easy installation with template
- Require some drilling and cutting of your hood
- Stainless steel fasteners are included
- Full-size template with instructions for cutting the airflow holes in the hood included
SKU: PSC19-53-012P1 -
Body Kits & Accessories, Exterior Parts, Hood Vent
Poison Spyder Hood Louver (Black) – 19-53-010P1
- For Sport and Sahara models only
- Black powder coat finish
- Crafted from quality, thick gauge aluminum sheet
- Aluminum makes the hood louver light weight and corrosion resistant
- CNC laser-cut and die-stamped
- Helps reduce “hood wobble” at speeds
- Keeps engine cool
- Easy installation with template
- Require some drilling and cutting of your hood
- Stainless steel fasteners are included
- Full-size template with instructions for cutting the airflow holes in the hood included
SKU: PSC19-53-010P1 -
Differential Covers, Drivetrain & Differential, Performance Axle Components
Poison Spyder Dana 44 Bombshell Differential Cover – 42-11-044-PC
Differential Covers, Drivetrain & Differential, Performance Axle ComponentsPoison Spyder Dana 44 Bombshell Differential Cover – 42-11-044-PC
- Poison Spyder Customs | Part Number: PSC42-11-044-PC
- Popular Axle Manufacture:Dana
- Type Of Material:Steel
- Axle Location:Front and Rear
- Axle Type:Dana 44
- Fitment:Universal Fit
- Finish Type:Powder Coated
- Oil Capacity:Extra Capacity
SKU: PSC42-11-044-PC -
Armor & Protection, Skid Plates
Poison Spyder Customs Crawler Front Skid – 19-58-030P1
- Poison Spyder Customs | Part Number: PSC19-58-030P1
- Winch Mount Compatible:No
- Width:Stubby
- Light Mounts Included:Light Mounts Not Included
- Finish:Powder Coat
- Material:Steel
- D-Ring Mount Included:D-Ring Mount Not Included
- Position:Fuel Tank
- Fitment:Direct Fit
SKU: PSC19-58-030P1 -
Bumpers, Bumpers, Tire Carriers & Winch Mounts, Rear Bumpers
Poison Spyder Customs Bruizer Rear Bumper (Black) – 17-67-010P1
Bumpers, Bumpers, Tire Carriers & Winch Mounts, Rear BumpersPoison Spyder Customs Bruizer Rear Bumper (Black) – 17-67-010P1
- Poison Spyder Customs | Part Number: PSC17-67-010P1
- Includes Receiver Hitch:Yes
- D-Ring Mount Included:No
- Position:Rear
- Fitment:Direct Fit
- Finish:Semi-gloss Black
- Tire Carrier:No
SKU: PSC17-67-010P1 -
-
Front Bumpers
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Black) – 17-59-010DBP1
Front BumpersPoison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Black) – 17-59-010DBP1
- 2 and 4-door models
- Black powder coat
- 3/16 inch plate steel
- Mid-width high clearance bumper
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamps
- Integrated winch mount
- Brawler bar is 1-3/4 inch diameter .120 inch wall DOM tubing
- Shackle tabs made of 1 inch thick plate steel
SKU: PSC17-59-010DBP1 -
Rock Sliders and Guards
Poison Spyder Brawler Rockers in Black Powder Coat (Black) – 17-08-200P1
- 2-door models
- Black powder coat
- Two-piece inchmini-boatside inch style rocker armor
- 3/16 inch plate steel
- All fastener holes are countersunk
- Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail
- Angled facets that allow up to a 40 inch tire
SKU: PSC17-08-200P1 -
Rock Sliders and Guards
Poison Spyder Brawler Rockers in Bare Steel (Bare Steel) – 17-08-200
- 2-door models
- Bare steel
- Two-piece inchmini-boatside inch style rocker armor
- 3/16 inch plate steel
- All fastener holes are countersunk
- Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail
- Angled facets that allow up to a 40 inch tire
SKU: PSC17-08-200 -
Rock Sliders and Guards
Poison Spyder Frame-Mounted Rocker Knockers (Bare Steel) – 17-08-030
- CNC laser cut from 3/16 inch plate steel
- Slider rail is fabricated from CNC-bent 1.5 inch x .120 wall DOM tubing
- Main tube of the rocker knocker is filled with a CNC laser-cut slider skid
- Features poison spyders exclusive oval dimples for structural strength
- Slider and skid mount at an angle to the main tube of the rocker knocker to provide boatside-like protection from the rocks
- Bolt on or weld on installation
SKU: PSC17-08-030 -
-
Roll Cages & Roll Bars
Poison Spyder Lazer-Fit Full Cage Kit – 13-19-020
- Bare steel
- Kit comes complete with all components, ready to weld together
- Laser-notched ends and laser-etched assembly guides make installation a breeze
- Kit can be assembled in only an hour! (minus finish welding and RandR)
SKU: PSC13-19-020 -
Rock Sliders and Guards
Poison Spyder Rocker Knockers with Sliders (Bare Steel) – 13-08-050
- Bare steel
- For use with TJ fender flares
- High strength 3/16 inch plate steel
- Bolt holes are countersunk
- Stainless steel flat head hardware
- Mounts to the body itself – no resulting gap or misalignment when a body lift is installed
- Slider is high strength DOM structural tubing, welded to the Rocker Knocker with additional DOM tube spacers
SKU: PSC13-08-050 -
-
Tube Fenders
Poison Spyder Front Steel Crusher Flares – Standard Width (Black) – 17-03-030P1
- 2 and 4-door models
- Black powder coat
- 1.5″ X .120″ wall DOM structural tubing
- CNC laser cut, 3/16″ thick steel mounting plate
- Mounting holes are countersunk for the use of flat-head stainless steel mounting hardware
- Top plate is CNC laser cut 1/8″ aluminum plate
- Sold as a pair
SKU: PSC17-03-030P1 -
-
-
Tube Fenders
Poison Spyder Aluminum Front Crusher Flares – Extra Wide (Aluminum) – 17-03-032-ALUM
- 2 and 4-door models
- Aluminum
- Replace flimsy plastic OE fender flares with light-weight, sturdy aluminum
- 2-1/4″ wider than standard width flares
- CNC laser cut 3/16″ mounting plate and 1/8″ top plate
- CNC roll-bent 1.5″ OD X .120 wall DOM tube outer rub rail
- Roll-bending gives smooth, sweeping, continuous bends that match the Jeep’s lines perfectly
- Internal bracing kit transfers impact loads to Jeep’s heavy gauge inner tub structure
SKU: PSC17-03-032-ALUM -
Rock Sliders and Guards
Poison Spyder Brawler Rockers in Black Powder Coat (Black) – 18-08-200P1
- 4-door models
- Black powder coat
- Two-piece “mini-boatside” style rocker armor
- 3/16″ plate steel
- All fastener holes are countersunk
- Boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail
- Angled facets that allow up to a 40″ tire
SKU: PSC18-08-200P1 -
-
